 |
| Quantity: | |
|---|---|
Mini plastic film blowing machine
Characteristic:
1. main motor and take-up motor are controlled by inverter
2. by pneumatic cylinder system to adjust the gap of take-up roller and embossing roller
3. equipped with A-FORM wooden board to make the gusset
4. material of screw and barrel: 38CrMoAlA
hardness of heat treatment: screw HV≥740, barrel HV≥900
depth of hardening:0.4-0.7mm
brittleness grade: ≤2 grade
5. Gear box: Surface heat quenching and tempering/auto. Oil lubricated
6. Die material: steel 45#/surface treatment of flow channel: hard chrome- plating
7. Digital display temperature controller
Model | RHT45-FM500 |
Suitable material | PE |
Screw diameter | φ45mm |
L/D ratio | 30:1 |
Main motor | 11kw |
Max. Extrusion output | 30-45kg/h |
Die size | 60/80mm |
Max. Film width | 500mm |
Thickness (single-face) | 0.01-0.1mm |
Mini plastic film blowing machine
Characteristic:
1. main motor and take-up motor are controlled by inverter
2. by pneumatic cylinder system to adjust the gap of take-up roller and embossing roller
3. equipped with A-FORM wooden board to make the gusset
4. material of screw and barrel: 38CrMoAlA
hardness of heat treatment: screw HV≥740, barrel HV≥900
depth of hardening:0.4-0.7mm
brittleness grade: ≤2 grade
5. Gear box: Surface heat quenching and tempering/auto. Oil lubricated
6. Die material: steel 45#/surface treatment of flow channel: hard chrome- plating
7. Digital display temperature controller
Model | RHT45-FM500 |
Suitable material | PE |
Screw diameter | φ45mm |
L/D ratio | 30:1 |
Main motor | 11kw |
Max. Extrusion output | 30-45kg/h |
Die size | 60/80mm |
Max. Film width | 500mm |
Thickness (single-face) | 0.01-0.1mm |
